ODROID-H3

ODROID-H3

ODROID-H3 má stejný tvarový faktor a podobnou energetickou účinnost jako jeho předchůdce ODROID-H2+, ale je výkonnější a nabízí vyšší výkon.  

Zcela nový 64bitový jednodeskový počítač x86 se skvělou kompatibilitou s velkou kapacitou paměti a pokročilými IO porty.  

Čtyřjádrový procesor Intel® Jasper Lake N5105 má základní takt 2 GHz a boost takt 2,9 GHz s 1,5 MB L2 a 4 MB L3 mezipaměti 10 nm procesem.

Až 64 GB dvoukanálové paměti DDR4 PC4-23400 (2933 MT/s)

Dva sloty SO-DIMM, až 32 GB na slot

PCIe 3.0 x 4 sloty pro jedno úložiště M.2 NVMe 2 x 2,5 Gbit Ethernet porty 2 x SATA 3.0 porty

Akcelerátor SSE4.2 (SMM, FPU, NX, MMX, SSE, SSE2, SSE3, SSSE3, SSE4.1, SSE4.2, AES)

Grafika Intel UHD Graphics 24 EUs Turbo 800 MHz (H3+: 900 MHz)

Vícenásobné video výstupy HDMI 2.0 a DP 1.2

Konfigurovatelný režim neomezeného výkonu, který umožňuje CPU běžet v režimu trvalého turbo boost.

Záložní baterie RTC / BIOS je součástí balení  

A. CPU (Intel Celeron N5105)

B. 2 x DDR4 SO-DIMM slots (Dual channel memory support)

C. 1 x M.2 PCI Express Module Socket (NGFF-2280)

D. 1 x eMMC (Embedded Multimedia-Card) Socket

E. 2 x SATA Power Connectors (2.5mm pitch, JST-XH compatible connector)

F. 2 x SATA3 6.0 Gb/s Data Connectors

G. 1 x DC Power Jack

H. 2 x USB 3.0

I. 2 x USB 2.0

J. 1 x HDMI 2.0

K. 1 x DisplayPort 1.2

L. 2 x RJ45 Ethernet Ports (10/100/1000/2500)

M. 5 x System LED Indicators

N. 1 x Peripheral Expansion Header (24-pin)

O. 1 x Power Switch

P. 1 x Reset Switch

Q. 1 x Backup Battery Connector (2-pin)

R. 1 x Active Cooling Fan Connector (4-pin)

S. 1 x Audio out, 1 x Audio in, 1 x SPDIF out    

Specifikace:

Processor

• Intel Celeron N5105(H3+: N6005) Processor (10nm, Quad-Core, TDP 10W)
• H3(N5105) : up to 2.9GhzH3+(N6005) : up to 3.3Ghz

4MB L2 Cache

Intel UHD Graphics (24/32 EU up to 900MHz)

Memory 2 x DDR4 1.2V SO-DIMM slots

Dual Channel, up to 2933 MT/s (DDR4-PC23400)

Max memory capacity 64GB

DDR3/DDR5 are not supported

Storage 1 x eMMC connector (bootable and selectable on BIOS)

Various eMMC modules can be purchased at Hardkernel store 2 x SATA3 6Gbps 1 x M.2 slot (PCIe 3.0 x 4, supports NGFF-2280 cards)

M.2 SATA SSD is not supported

Networking 2 x GbE LAN ports (RJ45, supports 10/100/1000/2500 Mbps)

Realtek RTL8125B

Supports Wake-On-Lan

LED indicators (Green: Link, Amber: Traffic)

Video 1 x DisplayPort 1.2 (up to 4K@60Hz) 1 x HDMI 2.0 (up to 4K@60Hz)

Dual simultaneous display support

Audio 1 x Audio out (3.5mm jack) 1 x Audio in (3.5mm jack) 1 x SPDIF out (ALC1200, HDA codec) * HDMI & DP have audio output too.

External I/O 2 x USB 3.0 Host ports 2 x USB 2.0 Host ports 1 x Peripheral Expansion Header (24-pin, 2.54mm pitch) – 1 x DC 5V, 1 x DC 3.3V, 5 x GND – 1 x UART (TXD/RXD/RTS/CTS) – 2 x I2C (SCL/SDA) – 1 x External Power Button – HDMI CEC, 5VA+ – Three USB 2.0 ports – All 3.3V I/O signal level

Other features

Passive Heatsink

BIOS Backup Battery – Maintains system time and BIOS settings

Power Button

Reset Button

System LEDS Indicators: – Red (PWR) – Solid light when DC power is supplied – Blue (left, SLEEP) – turns off only when the system enters into suspend mode – Blue (right, PMIC) – turns on only when the major power rails are working – Amber (SATA) – Flashes when SATA data transfers – Green (NVMe) – Flashes when NVMe data transfers

Active Cooling Fan Connector (12V 4-pin, PWM input + TACHO output) – Active Cooling Fan is optional – Connector (4-pin, 2.54mm pitch)

Power

DC jack : outer (negative) diameter 5.5mm, inner(positive) diameter 2.1mm

DC 14V ~ 20V (up to 60W) – DC 15V/4A power adapter is recommended if you don’t use two 3.5“ HDDs – DC 19V/7A power adapter is recommended if you two 3.5” HDDs together

Power consumption:

• – IDLE : ≃1..9W
• – CPU Stress : ≃15W
• – CPU+GPU Stress : ≃18W
• – Power-off : ≃0.25W
• – Suspend : ≃0.6W

Form Factor 110mm x 110mm x 47mm Approx.    

Installation https://wiki.odroid.com/odroid-h3/start#installation  

WIKI https://wiki.odroid.com/odroid-h3/start  

Introduction https://dn.odroid.com/ODROID-H2/H3_pics/H3_H3+_Introduction.pdf